Envoy 2WD V8-5.3L VIN P (2004)
Tighten the nut to 2 N.m (18 lb in).
7. Install the inflator switch to the inflator bezel.
8. Position the seat belt over the top of the trim panel, ensuring that the buckle is not behind the trim panel.
9. Align the locating tabs on the trim panel to the holes in the body.
10. Seat the clips that retain the trim panel to the body.
11. Install the seat belt lower anchor.
Tighten the anchor bolt to 70.0 N.m (52 lb ft).
12. Install the right rear door sill panel.
13. Install the lift gate sill plate.
14. Install the trim panel-rear quarter upper.
Trim Panel Replacement - Rear Quarter - Right (TrailBlazer EXT, Envoy XL)
Trim Panel Replacement - Rear Quarter - Right (TrailBlazer EXT, Envoy XL)
Removal Procedure
1. Remove the cargo shelf.
2. Tumble the third row seats to the cargo position.
3. Remove the right body side window rear garnish molding.
4. Remove the right body side window forward garnish molding.
5. Remove the liftgate sill plate. Refer to Door Sill Plate Replacement - Liftgate.
6. Remove the right rear door sill panel.
7. Remove the lower seat belt anchor bolt.
8. Release the five screws that retain the rear quarter trim panel to the body.
9. Remove the rear quarter trim panel from the vehicle.
