Envoy 2WD V8-5.3L VIN P (2004)
1. Install the 3 bolts securing the rear seat cushion latch to the seat pan.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion latch release bolts to 10 N.m (88 lb in).
2. Install the small loop (1) onto the rear seat cushion latch (2).
3. Install the strap through the opening in the seat pan.
4. Install the rear-seat cushion cover and the pad.
5. Install the rear seat cushion assembly to the vehicle.
Seat Cushion Outer Trim Panel Replacement
Seat Cushion Outer Trim Panel Replacement
Removal Procedure
1. Remove the trim panel from the power seat by performing the following:
1. Remove the 3 seat switch bezel mounting screws.
2. Remove the 3 trim panel retaining screws.
2. Remove the trim panel from the manual seat by performing the following steps:
1. Remove the lumbar support knob.
2. Remove the seat back recliner handle.
