Envoy 2WD V8-5.3L VIN P (2004)
7. Connect the J-strips that retain the cover to the seat pan.
8. Install the push pins (1) on the underside of the seat bottom.
9. Install the latch bezels.
10. Install the seat cushion bracket.
11. Install the seat cushion in the vehicle.
Seat Cushion Panel Replacement - Rear No. 2
Seat Cushion Panel Replacement - Rear No. 2
Removal Procedure
1. Remove the two rear seat cushion bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).
2. Remove the seat cushion assembly.