Envoy 2WD V8-5.3L VIN P (2004)
3. Remove the rear brake hose bolt from the rear brake caliper.
4. Plug the opening of the brake hose in order to prevent excessive brake fluid loss and contamination.
Important: Discard the copper gaskets. DO NOT reuse the copper, replace them.
5. Remove the copper gaskets from the brake hose bolt.
6. Remove the rear brake caliper mounting bolts.
7. Remove the rear brake caliper from the brake caliper mounting bracket.
Installation Procedure
1. If the brake caliper guide pin is to be reused, clean the brake caliper guide pin using denatured alcohol, or equivalent.
2. Dry the brake caliper guide pin using non-lubricated, filtered air.
