Envoy 2WD V8-5.3L VIN P (2004)
Important: It maybe necessary to readjust the park brake shoes to allow the brake rotor to be reinstalled.
4. Adjust the park brake shoe (1).
Important: Ensure that the rotor to axle flange relationships marks are aligned, if the brake rotor has been refinished, after the brake rotor is installed.
5. Install the brake rotor by slowly turning the rotor while pushing the rotor on the axle flange.
6. Install the rear brake caliper mounting bracket.
7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. Refill the brake master cylinder reservoir, if needed.
Caution: Do not move the vehicle until a firm brake pedal is obtained. Failure to obtain a firm pedal before noosing vehicle may result in
personal injury.
10. Pump the brake pedal slowly and firmly in order to seat the brake pads.
11. Burnish replaced or refinished rotors.
