Envoy 2WD V8-5.3L VIN P (2004)
10. Remove the guide pin bushing from the brake caliper mounting bracket.
11. Clean the brake caliper mounting bracket with denatured alcohol.
12. Dry the brake caliper mounting bracket using non-lubricated, filtered air.
Installation Procedure
1. Install the guide pin bushing on the brake caliper mounting bracket.
2. Install the guide pins in the brake caliper mounting bracket.
3. Apply high temperature silicone brake lubricant to the brake caliper guide pins. DO NOT apply lubricant to the brake pad hardware or retaining
clips.
