Envoy 2WD V8-5.3L VIN P (2004)
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the air outlet duct to the console.
4. Install the screw to the air outlet duct.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
5. Install the console.
Recirculation Actuator Replacement
RECIRCULATION ACTUATOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the HVAC module assembly.
2. Remove the air inlet assembly.
3. Remove the screws from the air inlet assembly.
4. Remove the recirculation actuator screws.
5. Remove the recirculation actuator.
INSTALLATION PROCEDURE
1. Install the recirculation actuator.
2. Install the recirculation actuator screws.
NOTE: Refer toFastener Notice in Service Precautions.
Tighten