Envoy 2WD V8-5.3L VIN P (2004)
Air Duct: Service and Repair
Air Outlet Duct
Replacement - Floor, LH
AIR OUTLET DUCT REPLACEMENT - FLOOR, LH
REMOVAL PROCEDURE
1. Remove the LH lower closeout/insulator panel.
2. Remove the push pin (2) retaining the floor air outlet duct (1) to the heater module.
3. Remove the floor duct (1).
INSTALLATION PROCEDURE
1. Install the floor air outlet duct (1) into position.
2. Install the floor air outlet duct retaining push pin (2).
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to .....1.9 N.m (17 lb in).
3. Install the LH lower closeout/insulator panel.
Replacement - Floor, RH
AIR OUTLET DUCT REPLACEMENT - FLOOR, RH