Envoy 2WD V8-5.3L VIN P (2004)
Horn: Scan Tool Testing and Procedures
Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
Battery Voltage: The scan tool displays the current state of the battery in volts.
Horn Output: The scan tool displays On/Off to indicate the current state of the horn as commanded by the body control module (BCM).
Scan Tool Data List
SCAN TOOL DATA LIST
The Horns Scan Tool Data List contains all of the horn related parameters that are available on the scan tool. The parameters in the list are arranged in
alphabetical order. The column, "Data List," indicates the location of the parameter within the scan tool menu selections. Use the Horns Scan Tool Data
List as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System
Check - Horns.
Use the Scan Tool Data List only after the following is determined:
-
There is no published DTC procedure nor published symptom procedure for the customer concern.
-
The DTC or symptom diagnostic procedure indicated by the diagnostic system check does not resolve the customer concern.
The Typical Data Values are obtained from a properly operating vehicle under the conditions specified in the first row of the Scan Tool Data List table.
Comparison of the parameter values from the suspect vehicle with the Typical Data Value(s) may reveal the source of the customer concern.
Scan Tool Output Controls
