Envoy 2WD V8-5.3L VIN P (2004)
1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates.This is normal operation and does not indicate
an SIR system malfunction.
4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
5. Remove the CPA from the LF side impact module yellow 2-way connector (1) located under the driver seat.
6. Disconnect the LF side impact module yellow 2-way connector (1) located under the driver seat.
ENABLING PROCEDURE
