Envoy 2WD V8-5.3L VIN P (2004)
Accelerator Pedal: Service and Repair
ACCELERATOR PEDAL ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT:
-
The electronic adjustable accelerator pedal, mounting bracket, return spring and the pedal position sensor are not serviced separately, but as a unit.
The accelerator assembly is already set in the full forward position.
-
The electronic adjustable pedal (EAP) must be moved to the full forward position whenever work is done on or around the pedal assembly.
1. Adjust brake pedal to the full forward position. Towards the front of the vehicle.
2. Remove the knee bolster trim panel.
3. Remove the electrical connector for the accelerator pedal.