Envoy 2WD V8-5.3L VIN P (2004)
10. Use the following procedure if the vehicle is equipped with 4 wheel drive (4WD):
10.1.
Remove the transfer case.
10.2.
Remove the front propeller shaft.
10.3.
Support the transmission with a suitable transmission jack.
10.4.
Remove the transmission support.
10.5.
Lower the transmission slightly.
10.6.
Remove the EVAP/fuel hose/pipe assembly from the retaining clips (1) on the transmission.
11. Remove the EVAP/fuel hose/pipe bracket nut (2).
12. Remove the fuel hose/pipe bracket from the bellhousing stud.
