Envoy 2WD V8-5.3L VIN P (2004)
14. Disconnect the LF side impact module yellow 2-way connector (1) located under the driver seat.
ENABLING PROCEDURE
1. Remove the key from the ignition.
2. Connect the steering wheel module yellow 4-way connector (2) located left of the steering column near the knee bolster.
3. Install the CPA (1) to the steering wheel module yellow 4-way connector located left of the steering column near the knee bolster.
4. Connect the IP module yellow 4-way connector (1) located behind the IP support.
5. Install the CPA to the IP module yellow 4-way connector (1) located behind the IP support.
