Envoy 2WD V8-5.3L VIN P (2004)
10. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required
retention period. Refer to Inflator Module Handling and Scrapping.
INSTALLATION PROCEDURE
1. Connect the SIR wiring harness to the module.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the inflatable side impact module to the seat back frame with the 2 screws (1).
Tighten
Tighten the screws to 9 N.m (80 lb in).