Envoy 2WD V8-5.3L VIN P (2004)
1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Access IP module connector through glove box.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.
5. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.
6. Remove the CPA from the IP module yellow 4-way connector (1) located behind the IP support.
7. Disconnect the IP module yellow 4-way connector (1) located behind the IP support.
ENABLING PROCEDURE
