Envoy 2WD V8-5.3L VIN P (2004)
7. Align the hole in the pinion shaft with the bolt hole in the differential case.
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Install the new pinion shaft locking bolt.
^
Tighten the pinion shaft locking bolt to 36 Nm (27 ft. lbs.).
9. Install the rear axle housing cover and the gasket.
10. Install the brake caliper.
11. Install the tire and wheel assembly.
12. Fill the rear axle with axle lubricant. Use the proper fluid.
13. Lower the vehicle.