Envoy 2WD V8-5.3L VIN P (2004)
Installation Procedure
1. Install a stationary window into the opening.
2. Install the upper quarter trim.
3. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
4. Inspect the radio or the OnStar(R) system, if equipped, to verify reception.
5. Close the liftgate window.
Quarter Window Replacement (XUV)
Quarter Window Replacement (XUV)
Tools Required
*
J 39032 Stationary Glass Removal Tool
*
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
*
Isopropyl Alcohol or Equivalent
*
Cartridge-type Caulking Gun
*
Commercial-type Utility Knife
*
Razor Blade Scraper
*
Suction Cups
*
Plastic Paddle
Removal Procedure
Caution: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or
personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces
and the interior trim.
1. Open the endgate window.
2. Remove the upper rear roof applique.
