Envoy 4WD L6-4.2L VIN S (2003)
1. Apply grease provided to inside of rack and pinion boot ribs (4).
2. Place the new large seal retaining clamp (3) onto rack and pinion boot (4).
3. Install boot (4) over inner tie rod end. Align the arrows (2) on boot (4) with the range (1) marked on the gear housing.
4. Install the new small seal retaining clamp (2) over the boot (1).
5. Slide the boot (1) towards the center of the gear assembly until the boot seats in the inner tie rod retaining groove.
