Envoy 4WD V6-4.3L VIN W (1998)
2. Install the fuel lines to the fuel meter body assembly.
3. Install the bracket for the engine wiring harness on the lower intake manifold stud.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the engine wiring harness bracket nut.
^
Tighten the engine wiring harness bracket nut to 12 Nm (106 inch lbs.).
5. Install the accelerator and cruise control cable bracket to the throttle body.
6. Install the accelerator and cruise control cable bracket nuts.
^
Tighten the accelerator and cruise control cable bracket nuts to 9 Nm (80 inch lbs.).
