Envoy 4WD V6-4.3L VIN W (1998)
Fuel Line Coupler: Service and Repair
With Metal Collar
Tools Required
J37088 Tool Set, Fuel Line Quick-Connect Separator
Important: Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Release.
Removal Procedure
1. Slide the dust cover from the quick-connect fitting.
2. Grasp both sides of the fitting. Twist the female connector 1/4 turn in each direction to loosen any dirt within the fitting.
Caution: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
3. Blow dirt out of the fitting using compressed air.
4. Choose the correct tool from J37088 Tool Set for the size of the fitting. Insert the tool into the female connector, then push inward to release the
locking tabs.
