Envoy 4WD V6-4.3L VIN W (1998)
7. Remove the seat belt retractor assembly from the vehicle.
Installation Procedure
1. Install the seat belt retractor assembly to the vehicle.
2. Install the bolt that retains the seat belt retractor assembly to the vehicle.
Tighten
Tighten the seat belt retractor assembly bolt to 70 N.m (52 lb ft).
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Guide the seat belt through the opening in the body side trim panel.
4. Install the body side trim panel. Refer to Trim Pane Replacement - Body Side (Extended Cab) in Interior Trim.
5. Install the upper seat belt anchor plate and bolt to the vehicle.
Tighten
Tighten the upper seat belt anchor plate bolt to 70 N.m (52 lb ft).
6. Close the upper seat belt anchor plate cover.