Envoy 4WD V6-4.3L VIN W (1998)
Starter Motor: Service and Repair
Starter Motor Overhaul (Sd Series)
DISASSEMBLY PROCEDURE
1. Remove the starter motor.
2. Remove the solenoid terminal field lead screw.
3. Remove the following components from the starter motor:
3.1. The through bolts
3.2. The identification tag
3.3. The commutator end frame
Note the location of the through bolt heads relative to the field lead for assembly.
4. Remove the brake washer from the armature shaft.
5. Remove the frame with field from the armature.
6. Tilt the armature in order to disengage the drive collar from the shift lever.
7. Remove the armature with the drive from the drive end frame.
8. Disassemble the starter solenoid.
9. Remove the shift lever shaft retaining ring from the drive end housing.
10. Remove the shift lever shaft.
If the shaft is staked into place, perform the following:
10.1. Use a drill in order to remove the stake.
10.2. Remove the drive shaft.
10.3. Discard the shaft and the retainer.
11. Remove the plunger with the return spring from the drive end housing.
