Envoy 4WD V6-4.3L VIN W (1998)
Shackle: Service and Repair
Spring Shackle Replacement
REMOVAL PROCEDURE
1. Raise the vehicle on a hoist. Support the rear axle.
2. Remove the following parts:
^
The frame to shackle nut
^
The washers
^
The frame bolt
3. Remove the following parts:
^
The shackle to spring nut
^
The washers
^
The bolt
4. Remove the shackle from the vehicle.
INSTALLATION PROCEDURE
1. Install the shackle to the vehicle.
2. Install the following parts:
^
The shackle to the spring bolt
^
The washers
^
The nut
^
Do not tighten the nut.
3. Install the following parts:
^
The frame to shackle bolt
^
The washers
^
The nut
Do not tighten the nut.
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that
application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the
