Envoy 4WD V6-4.3L VIN W (1998)
9. Install the oil pass cover and the oil pass cover bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
10. Install the 1-2 accumulator piston with the piston legs facing toward the case.
11. Install the oil seal ring to the accumulator cover.
12. Install the 1-2 accumulator spring onto the piston.
13. Install the 1-2 accumulator cover and the cover bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
14. Remove the J 25025-B from the transmission case.
15. Install the control valve body.