Envoy 4WD V6-4.3L VIN W (1998)
10. Install the 1-2 accumulator piston to the accumulator cover.
11. Install the 1-2 accumulator springs onto the piston.
12. Install the 1-2 accumulator cover.
13. Install the 1-2 accumulator cover bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
14. Install the wiring harness connector to the transmission pass-through connector.
15. Install the oil pan and the oil filter. Refer to one of the following procedures:
16. Install the oil pan and the oil filter.
17. Install the converter heat shield. Refer to one of the following procedures in Exhaust System:
^
Catalytic Converter Replacement.