Envoy 4WD V6-4.3L VIN W (1998)
Clutch Slave Cylinder - Bleed Screw and Quick Connect Coupling
5. Using J 36221, remove the clutch line from the concentric slave cylinder.
Depress the white plastic sleeve on the quick connect coupling to separate the clutch line from the concentric slave cylinder.
6. Disconnect the hydraulic line from the clip.
7. Remove the master cylinder from the vehicle.
INSTALLATION PROCEDURE
Clutch Slave Cylinder - Bleed Screw and Quick Connect Coupling
1. Position the master cylinder to the vehicle.
2. Connect the hydraulic line to the clip.
3. Install the clutch line into the concentric slave cylinder quick connect coupling.
4. Lower the vehicle.
