Envoy 4WD V6-4.3L VIN W (1998)
Pinion Bearing: Service and Repair
Front Axle
Pinion Bearing Cup Installation
INSTALLATION PROCEDURE
^
Tools Required
-
J 33837 Pinion Bearing Cup Remover and Installer
1. Install the outer bearing into the case using the J 33837-1, the J 33837-3, and the J 33837-4.
2. Install the inner bearing into the case using the J 33837-1, the J 33837-3, and the J 33837-4.
Pinion Installation
^
Tools Required
-
J 8614-01 Pinion Yoke Holder
-
J 33782 Pinion Oil Seal Installer
-
J 33785 Pinion Bearing Installer