Envoy 4WD V8-5.3L (2007)
1. Securely attach the mechanics wire already routed behind the I/P to the end of the coaxial cable (3).
2. If equipped, carefully remove the rose bud (1) from the coaxial cable.
3. Grasp and gently pull the mechanics wire through the cowl insulator, routing the coaxial cable behind the I/P.
4. Attach the lower rose bud (2) to the cowl.
5. Connect the coaxial cable to the digital radio receiver.
6. Attach the coaxial cable to the right windshield pillar (1).
7. Install the right front door sill plate.
8. Install the right closeout insulator panel.
9. Connect the electrical connectors to the digital radio antenna assembly.
10. Install the headliner.
11. Install the right sunshade and inboard retaining clip.
12. Install the I/P trim pad.
13. Install the right windshield garnish molding.
