Envoy 4WD V8-5.3L (2007)
Glove Compartment: Service and Repair
Instrument Panel Compartment Door Replacement
Removal Procedure
1. Remove the right closeout/insulator panel.
2. Remove the 3 storage compartment retaining screws.
3. Remove the storage compartment from the instrument panel (I/P).
Installation Procedure
1. Position the storage compartment to the I/P.
Notice: Refer to Fastener Notice.
2. Install the 3 screws.
Tighten the screws to 2.5 N.m (22 lb in).
3. Install the right closeout/insulator panel.