Envoy 4WD V8-5.3L (2007)
Rear Seat Back Cushion Latch Bracket Replacement
Removal Procedure
1. Remove the seat back from the vehicle.
2. Remove the bolts (2) that retain the latch bracket to the seat hinge.
3. Remove the latch bracket from the seat hinge.
Installation Procedure
1. Position the latch bracket to the seat hinge.
Notice: Refer to Fastener Notice.
2. Install the latch bracket bolts (2) that retain the latch bracket to the seat hinge.
Tighten the latch bracket bolts to 35 N.m (26 lb ft).
3. Install the seat back to the vehicle.
Rear Number 1 Seat Back Release Latch Replacement
Rear Number 1 Seat Back Release Latch Replacement
Removal Procedure
1. Remove the seat back cover and pad.
2. Remove the release latch by pinching the lower locking tabs together.