Envoy 4WD V8-5.3L (2007)
6. Engage the seat cover to the hook and loop retaining strips on the seat back pad.
Notice: Refer to Fastener Notice.
7. Install the screw that retains the rear seat back release latch bezel to the rear seat back.
Tighten the rear seat back release latch bezel screw to 3 N.m (26 lb in).
8. Install the 3 push-pins at the bottom of the rear seat back.
9. Engage the hook and loop retaining strips at the bottom of the rear seat back.
10. Starting at either corner, engage the J-strips at the bottom of the rear seat back.
11. Install the head restraints.
12. Install the seat belt bezel to the rear seat back with the plastic retainers (2).
13. Install the rear seat belt anchor bolt into the seat belt buckle bracket.
Tighten the rear seat belt anchor bolt to 55 N.m (41 lb ft).
14. Install the seat belt buckle bracket, on the right side only.
15. Install the seat back into the vehicle.
Rear Seat Back Cushion Hinge Cover Replacement
Rear Seat Back Cushion Hinge Cover Replacement
