Envoy 4WD V8-5.3L (2007)
7. Remove the latch release cables from the right-hand hinge bracket.
Installation Procedure
1. Install the latch release cable to the right-hand hinge bracket.
2. Install the seat belt retractor assembly, on the left side only.
3. Install the seat back hinge brackets.
4. Install the head restraint retractor assembly.
5. Install the latch release assembly.
6. Install the latch release cables (1) and the head rest restraint cable (2) to the left-hand hinge bracket.
7. Install the seat back cover and pad.
Rear Seat Back Cushion Hinge Replacement
Rear Seat Back Cushion Hinge Replacement
Removal Procedure
1. Partially remove the seat back cover and pad.
2. Remove the latch release cables (1) from the latch release mechanism, located at the bottom of the seat back frame.
3. Remove the head restraint release cable (2) from the left hand hinge bracket.