Envoy 4WD V8-5.3L (2007)
1. Install the radiator.
2. Install the condenser to the radiator retaining tab.
Notice: Refer to Fastener Notice.
3. Install the bolts retaining the condenser to the radiator.
Tighten the bolts to 28 N.m (21 lb ft).
4. Install the coolant recovery line to the radiator.
5. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (Envoy, TrailBlazer) Air Inlet Grille Panel Replacement (Rainier).
6. Install the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement.
