Envoy 4WD V8-5.3L (2007)
Fan Clutch: Service and Repair
Fan Clutch Replacement
Removal Procedure
1. Remove the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement.
2. Remove the push-pin and release the fan clutch electrical connector from the fan shroud.
3. Remove the fan clutch from the fan shroud.
4. Remove the bolts retaining the fan blade to the fan clutch.
5. Separate the fan blade from the fan clutch.
Installation Procedure
1. Assemble the fan blade to the fan clutch.
Notice: Refer to Fastener Notice.
2. Install the 4 bolts to the fan blade.
Tighten the bolts to 27 N.m (20 lb ft).
3. Install the fan clutch to the fan shroud.
4. Install the push-pin to the fan clutch electrical connector.
5. Install the cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement.