Envoy 4WD V8-5.3L (2007)
Hose/Line HVAC: Service and Repair
Suction Screen Installation
Suction Screen Installation
Tools Required
J44551 Suction Screen Kit
Important: Suction screens are intended to be installed in the suction hose after a major compressor failure.
1. Using a caliper that reads to 3 decimal places, measure the ID of the suction hose or manifold suction fitting. Refer to the suction screen coverage
chart above to determine the correct size screen for the application.
2. Select and install the correct mandrel (1) on the threaded portion of the installation tool bolt.
*
The brass Universal Mandrel is for use on hose fittings with a smooth bore where the screen installs flush with the end of the fitting.
*
The 0.471" (11.96 mm) Mandrel is only for the 0.471" (11.96 mm) screen in hose fittings with an internal hourglass shape where the screen
installs at the recessed, reduced diameter point.