gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor Replacement|Page 1696 > < Crankshaft Position Sensor Replacement

Envoy 4WD V8-5.3L (2007)

Page 2
background image

1.  Install the CKP sensor.

Notice:  Refer to Fastener Notice.

2.  Install the CKP sensor bolt.

Tighten the bolt to 25 N.m (18 lb ft).

3.  Connect the electrical connector (2) to the CKP sensor (1).
4.  Install the starter.

Crankshaft Position Sensor Replacement|Page 1696 > < Crankshaft Position Sensor Replacement