Envoy 4WD V8-5.3L (2007)
7. Reposition the front door sealing weatherstrips (1) in order to access the side reveal molding screws.It is not necessary to remove the front door
sealing weatherstrip completely from the vehicle.
8. Remove the side reveal moldings screws.
9. Remove the side of the reveal moldings.
10. Remove the rearview mirror.
11. CAUTION: Refer to Glass and Sheet Metal Handling Caution.
IMPORTANT: The upper windshield reveal molding (1) fills the cavities between the body and windshield.
If the reveal molding is stretched or damaged it cannot be reused. It must be replaced.
12. Remove the upper windshield reveal molding (1).Grasp the lower corner of the windshield reveal molding by hand and slowly pull the reveal
