Envoy 4WD V8-5.3L VIN M (2005)
Trunk / Liftgate Striker: Service and Repair
Handle/Striker Replacement - Liftgate Window
Handle/Striker Replacement - Liftgate Window
Removal Procedure
1. Open the liftgate window.
2. Remove the nuts retaining the striker assembly to the liftgate window.
3. Remove the handle and striker assembly from the liftgate window.
Installation Procedure
1. Install the handle and striker assembly to the liftgate window.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the nuts retaining the striker assembly to the liftgate window.
Tighten the nuts to 6 N.m (53 lb in).
3. Check the liftgate window for proper operation, adjust if necessary. Refer to Striker Adjustment - Liftgate Window.