Envoy 4WD V8-5.3L VIN M (2005)
Console Replacement - Overhead
CONSOLE REPLACEMENT - OVERHEAD
REMOVAL PROCEDURE
1. Remove the 2 screws that retain the console to the roof panel.
2. Release the front retaining tabs.
3. Lower the console and disconnect the electrical connectors as needed.
4. Remove the console from the vehicle
5. If replacing the console, remove the garage door opener if equipped. Refer to Garage Door Opener Replacement in Garage Door Opener.
6. If replacing the console, remove the OnStar (R) microphone if equipped. Refer to OnStar Microphone Replacement in Cellular Communication.
7. If replacing the console, remove the personal message player/recorder if equipped. Refer to Personal Message Player/Recorder Replacement in
Radio, Stereo, and Compact Disc.
8. If replacing the console, remove the power sunroof switch if equipped. Refer to Sunroof Switch Replacement in Sunroof/Moonroof.
9. If replacing the console, remove the noise cancellation microphone if equipped. Refer to Microphone Replacement - Radio Volume Compensator
Interior in Sunroof/Moonroof.
INSTALLATION PROCEDURE
1. If replacing the console, install the noise cancellation microphone if equipped. Refer to Microphone Replacement - Radio Volume Compensator
Interior in Sunroof/Moonroof.
2. If replacing the console, install the power sunroof switch if equipped. Refer to Sunroof Switch Replacement in Sunroof/Moonroof.
3. If replacing the console, install the personal message player/recorder if equipped. Refer to Personal Message Player/Recorder Replacement in
Radio, Stereo, and Compact Disc.
4. If replacing the console, install the OnStar (R) microphone if equipped. Refer to OnStar Microphone Replacement in Cellular Communication.
5. If replacing the console, install the garage door opener if equipped. Refer to Garage Door Opener Replacement in Garage Door Opener.
6. Position the console to the roof panel.
7. Connect the electrical connectors as needed.
8. Seat the front retaining tabs.
9. Install the 2 screws retaining the console to the roof panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.2 N.m (10 lb in).
Console Replacement - Overhead (Envoy XUV)
CONSOLE REPLACEMENT - OVERHEAD
REMOVAL PROCEDURE
