gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Bracket Replacement - Console Floor|Page 12061 > < Bracket Replacement - Console Floor|Page 12059
Page 4
background image

1. Open the sunglasses compartment cover or the beauty cover on the console.
2. Remove the 2 screws (1) that retain the console (2) to the roof panel.
3. Pull the console down to disengage clips.
4. Disconnect the electrical connectors (3).
5. Remove the console from the vehicle.
6. If replacing the console, remove the switches. Refer to Power Quarter Window Switch Replacement in Trunk/Liftgate.
7. If replacing the console, remove the garage door opener, if equipped. Refer to Garage Door Opener Replacement in Garage Door Opener.
8. If replacing the console, remove the OnStar(R) microphone if, equipped. Refer to OnStar Microphone Replacement in Cellular Communication.
9. If replacing the console, remove the noise cancellation microphone if, equipped. Refer to Microphone Replacement - Radio Volume Compensator

Interior in Radio, Stereo, and Compact Disc.

10. If replacing the console, remove the personal message player/recorder, if equipped. Refer to Personal Message Player/Recorder Replacement in

Radio, Stereo, and Compact Disc.

INSTALLATION PROCEDURE

1. If replacing the console, install the personal message player/recorder, if equipped. Refer to Personal Message Player/Recorder Replacement in

Radio, Stereo, and Compact Disc.

2. If replacing the console, install the noise cancellation microphone, if equipped. Refer to Microphone Replacement - Radio Volume Compensator

Interior in Radio, Stereo, and Compact Disc.

3. If replacing the console, install the OnStar(R) microphone, if equipped. Refer to OnStar Microphone Replacement in Cellular Communication.
4. If replacing the console, install the garage door opener, if equipped. Refer to Garage Door Opener Replacement in Garage Door Opener.
5. If replacing the console, install the switches. Refer to Power Quarter Window Switch Replacement in Trunk/Liftgate.

6. Connect the electrical connectors (3).
7. Install the front retaining clips by pressing the console (2) into the roof.
8. Install the 2 screws (1) retaining the console to the roof panel.

NOTE:  Refer to Fastener Notice in Service Precautions.

Bracket Replacement - Console Floor|Page 12061 > < Bracket Replacement - Console Floor|Page 12059