Envoy 4WD V8-5.3L VIN M (2005)
1. Open the storage bin cover.
2. Remove the rubber mats covering the retaining screws
3. Remove the 6 screws that retain the storage bin to the console.
4. Remove the storage bin from the console.
Installation Procedure
1. Install the storage bin to the console.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 6 screws that retain the storage bin to the console.
Tighten the screws to 2.5 N.m (22 lb in).
3. Install the rubber mats covering the retaining screws.
4. Close the storage bin cover.
Cover Replacement - Jack Stowage (XUV)
COVER REPLACEMENT - JACK STOWAGE
REMOVAL PROCEDURE
1. Raise the midgate to the up position.
2. Fold the right rear seat to the cargo position.
3. Release the latch on top of the cover.