Envoy 4WD V8-5.3L VIN M (2005)
1. Remove the jack stowage cover.
2. Remove the nut (3) retaining the tool package (4) to the jack bracket.
3. Remove the nuts (1) retaining the jack bracket to the floor studs.
4. Remove the jack bracket from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Remove the jack bracket to the floor studs with the retaining nuts (1).
Tighten the jack bracket nuts to 10 N.m (88 lb in).
2. Remove the tool package (4) to the jack bracket with nut (3). Do not overtighten the nut.
3. Install the jack stowage cover.
Trim Cover Replacement - Body Lock Pillar Upper Tie Bar - Cargo (Envoy XUV)
Trim Cover Replacement - Body Lock Pillar Upper Tie Bar - Cargo (Envoy XUV)
Removal Procedure
