Envoy 4WD V8-5.3L VIN M (2005)
1. Route the seat belt webbing through the slot in the panel. Ensure that there are no twists in the belt.
2. Install the trim panel to the lock pillar.
3. Install the rear seat belt lower anchor bolt.
4. Install the lower body lock pillar trim panel.
Trim Panel Replacement - Body Side (Envoy XUV)
Trim Panel Replacement - Body Side (Envoy XUV)
Removal Procedure
1. Remove the cargo mat.
2. Remove the body lock pillar upper tie bar trim cover.
3. Remove the rear floor front trim plate.
4. Remove the cargo tie down loops and the cargo tie down blanks.
5. Remove the cargo lamp.
6. Remove the endgate window emergency switch, if equipped.
