Envoy 4WD V8-5.3L VIN M (2005)
3. Install the roof panel to the vehicle.
IMPORTANT: Be careful not to scratch or chip the paint.
4. Install the moveable roof panel bushings into the track of the moveable roof frame assembly.
1. Insert one of the roof panel bushings into the track.
2. Rotate the panel until the other roof panel bushing can be inserted into the track of the roof frame assembly.
3. Straighten the panel to retain the roof panel into the tracks.
5. Lower the rear of the roof panel down onto the rear roof panel brackets.
6. Install the screws retaining the roof panel to the rear roof panel brackets.
Tighten the screws to 5.5 N.m (49 lb in).
7. Close the moveable roof panel and verify proper fit and operation.
Moveable Roof Panel Bushing Replacement
MOVEABLE ROOF PANEL BUSHING REPLACEMENT
REMOVAL PROCEDURE
