Envoy 4WD V8-5.3L VIN M (2005)
3. Remove the fastener retaining the front latch (1) to the front latch slide.
4. Remove the front latch (1) from the front latch slide.
5. Remove the rear latch assembly.
6. Using a small flat-bladed tool, push the end of the front latch slide (3) forward until the front latch slide (1) is protruding from the moveable roof
frame assembly (2).
7. Remove the front latch slide (1) from the moveable roof frame assembly (2), by sliding it forward out of the channel of the frame assembly.
INSTALLATION PROCEDURE