Envoy 4WD V8-5.3L VIN M (2005)
1. Connect the electrical connector (1) to the moveable roof panel actuator.
2. Install the actuator to the moveable roof panel assembly.
3. Install the bolts (2) retaining the actuator to the moveable roof panel assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the actuator bolts to 5 N.m (44 lb in).
4. Install the moveable roof panel actuator cover.
5. Install the moveable roof panel.
Moveable Roof Panel Seal Replacement
MOVEABLE ROOF PANEL SEAL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the moveable roof panel.
2. Remove the roof panel seal by pulling the seal off of the retaining channel of the moveable roof frame assembly.
INSTALLATION PROCEDURE