Envoy 4WD V8-5.3L VIN M (2005)
3. Install the auxiliary heater inlet and outlet hose/pipe nut.
Tighten the nut to 10 Nm (89 inch lbs.).
4. Install the hose to the throttle body.
5. Using J 38185, position the throttle body hose clamp at the throttle body.
6. Install the inlet and outlet hoses/pipes to the water pump.
7. Using J 38185, position the auxiliary heater inlet and outlet hose/pipe clamps at the water pump.
8. Install the outlet hose to the water pump.
9. Using J 38185, position the outlet hose clamp at the water pump.
10. Install the inlet hose to the water pump.
11. Using J 38185, position the inlet hose clamp at the water pump.
12. Install the cooing fan and shroud.
13. Install the accessory drive belt tensioner.