Envoy 4WD V8-5.3L VIN M (2005)
2. Remove the air temperature actuator-left (1) retaining screws.
3. Disconnect the air temperature actuator-left electrical connector.
4. Remove the air temperature actuator-left.
INSTALLATION PROCEDURE
1. Install the air temperature actuator-left (1).
2. Install the air temperature actuator-left retaining screws.
Tighten the screws to 1.9 N.m (17 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the air temperature actuator-left electrical connector.
4. Install the I/P carrier.
5. Recalibrate the air temperature actuator on vehicles equiped with automatic climate control (C68). Refer to Re-Calibrating Actuators (Primary).
Air Temperature Actuator - Right
AIR TEMPERATURE ACTUATOR REPLACEMENT - RIGHT
REMOVAL PROCEDURE
1. Remove the I/P carrier.
2. Remove the air temperature actuator-right retaining screws.
3. Disconnect the air temperature actuator-right electrical connector.
4. Remove the air temperature actuator-right.
INSTALLATION PROCEDURE
1. Install the air temperature actuator-right.
2. Tighten the air temperature actuator-right retaining screws.
Tighten the screws to 1.9 N.m (17 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.