gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 13362 > < SIR Disabling and Enabling Zones|Page 13360
Page 11
background image

4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the connector position assurance (CPA) from the LF seat belt pretensioner yellow 2-way connector (1) located under the driver seat.
6. Disconnect the LF seat belt pretensioner yellow 2-way connector (1) located under the driver seat.

ENABLING PROCEDURE

1. Remove the key from the ignition.

SIR Disabling and Enabling Zones|Page 13362 > < SIR Disabling and Enabling Zones|Page 13360