Envoy 4WD V8-5.3L VIN M (2005)
Tail Light Bulb: Service and Repair
TAIL LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Remove the tail lamp assembly.
2. Remove the tail lamp circuit board.
3. Place the tail lamp assembly onto a clean prepared surface.
4. Pull the bulb straight out in order to remove the tail lamp bulb from the socket assembly.
INSTALLATION PROCEDURE
1. Install the tail lamp bulb to the tail lamp circuit board.
2. Ensure the bulbs are wiped clean and free of any oil or dirt.
3. Install the tail lamp to the vehicle.
4. Check the bulbs for proper operation.